Monel 400 Alloy (UNS N04400/ W.Nr. 2.4360 na 2.4361)
Okwu Mmalite ngwaahịa
Alloy 400 (UNS N04400) bụ ihe ngwọta siri ike nke nwere ike isi ike naanị site na ịrụ ọrụ oyi. Kemistri nke nickel-ọla kọpa nwere nnukwu ihe ngwọta siri ike nke otu agba. Ọ nwere ike dị elu na ike n'elu oke okpomọkụ yana nguzogide dị mma na ọtụtụ gburugburu ebe obibi. Monel 400 bụ otu n'ime alloys ole na ole na-ejigide ike ya na obere efu ma ọ bụ okpomọkụ cryogenic.
A na-eji Alloy 400 mee ihe n'ọtụtụ ebe na ngwa chọrọ iguzogide gburugburu ebe obibi na-egosi acids, alkalies, na elu okpomọkụ uzuoku. karịsịa nhazi mmiri na mmiri ọgwụ.
Dị ka ihe nickel-ọla kọpa alloy, alloy 400 nwere ezigbo nguzogide corrosion n'ọtụtụ mgbasa ozi dị iche iche. Alloy 400 bụ ihe e ji mara ya n'ozuzu corrosion eguzogide, ezi weldability, na agafeghị oke na elu ike na tempered ọnọdụ. Alloy a nwere ezigbo nguzogide na mmiri mmiri na-ekpo ọkụ na-eru ngwa ngwa, mmiri siri ike, na uzuoku. Ọ na-eguzogide ọgwụ hydrochloric na hydrofluoric acid mgbe a na-ekpochapụ ha. Alloy a dị ntakịrị magnetik na ọnụ ụlọ okpomọkụ. A na-eji Alloy 400 eme ihe n'ọtụtụ ebe na kemịkalụ, mmanụ, na ụlọ ọrụ injinia mmiri.
Ngwa ndị a na-ahụkarị bụ ndị na-agbanwe ọkụ, ndị na-emepụta Steam, ihe ndozi mmiri na ngwa ngwa, ngwa eletriki na eletrọnịkị, igwe na-ekpo ọkụ na-ekpo ọkụ, ihe ndị na-ekpo ọkụ na-ekpo ọkụ, ụlọ ọrụ mmiri na ihe ndị na-ewu ụgbọ mmiri dị ka propellers, shafts, fasteners.
Enwere ike ịmepụta Alloy 400 ngwa ngwa, rụọ ọrụ ma jikọta ya site na iji usoro ọkọlọtọ. N'ozuzu, oyi na-adọkpụ ma ọ bụ oyi na-adọta na ihe na-ebelata nchekasị na-enye ọrụ kachasị mma ma na-emepụta njedebe kachasị mma. Enwere ike itinye usoro ịgbado ọkụ ọkọlọtọ niile na alloy 400. Enwere ike ijikọ alloy ahụ na alloys dị iche iche na-eji ngwa ahịa kwesịrị ekwesị. Na mgbakwunye, ijikọ ga-ekwe omume site na brazing ma ọ bụ ire ere.
Ngwa
A na-eji Alloy 400 mee ihe n'ọtụtụ ebe na ngwa chọrọ iguzogide gburugburu ebe obibi na-egosi acids, alkalies, na elu okpomọkụ uzuoku. karịsịa nhazi mmiri na mmiri ọgwụ. Ngwa ndị a na-ahụkarị bụ ndị na-agbanwe ọkụ, ndị na-emepụta Steam, ihe ndozi mmiri na ngwa ngwa, ngwa eletriki na eletrọnịkị.
Nkọwapụta ngwaahịa
ASTM B163, ASTM B165
Ihe achọrọ kemịkalụ
Alloy 400 (UNS N04400)
Ihe mejupụtara%
| Ni Nickel | Cu Ọla kọpa | Fe lron | Mn Manganese | C Carbon | Si Silikoni | S sọlfọ |
| 63.0 min | 28.0-34.0 | 2.5 kacha | 2.0 kacha | 0.3 max | 0,5 kacha | 0.024 kacha |
| Ihe eji arụ ọrụ | |
| Mpụta Ike | 28 Ksi min |
| Ike ọdụdọ | 70 Ksi min |
| Ogologo oge (2" nkeji) | 35% |
Nkwenye nha nha
| OD | OD Toleracne | Nkwenye WT |
| Inch | mm | % |
| 1/8" | + 0.08/-0 | +/-10 |
| 1/4" | +/- 0.10 | +/-10 |
| Ruo 1/2" | +/- 0.13 | +/-15 |
| 1/2" ruo 1-1/2", ewepu | +/- 0.13 | +/-10 |
| 1-1/2" ruo 3-1/2", ewepu | +/- 0.25 | +/-10 |
| Mara: Enwere ike ịmekọrịta nnabata dị ka ihe ndị ahịa chọrọ | ||
| Nrụgide kacha ekwe omume (otu: BAR) | ||||||||
| Ọkpụrụkpụ mgbidi (mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| OD (mm) | 6.35 | 322 | 469 | 642 | 830 | |||
| 9.53 | 207 | 297 | 409 | 539 | 723 | |||
| 12.7 | 153 | 217 | 296 | 390 | 530 | |||
| 19.05 | 141 | 191 | 249 | 336 | ||||
| 25.4 | 105 | 141 | 183 | 245 | 363 | 450 | ||
| 31.8 | 111 | 144 | 192 | 283 | 349 | |||
| 38.1 | 92 | 119 | 159 | 232 | 285 | |||
| 50.8 | 69 | 89 | 117 | 171 | 209 | |||
Asambodo nsọpụrụ
ISO9001/2015 Standard
Ọkọlọtọ ISO 45001/2018
Asambodo PED
Asambodo ndakọrịta hydrogen TUV
| Mba. | Nha (mm) | |
| OD | Thk | |
| BA Tube Inner elu roughness Ra0.35 | ||
| 1/4" | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8" | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2" | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4" | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| BA Tube Inner elu roughness Ra0.6 | ||
| 1/8" | 3.175 | 0.71 |
| 1/4" | 6.35 | 0.89 |
| 3/8" | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2 ″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8" | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4" | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4" | 31.75 | 1.65 |
| 1-1/2" | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| BA Tube, Ọ dịghị arịrịọ maka ime elu roughness | ||
| 1/4" | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8" | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2 ″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |